• Wires do not rotate with the throttle, have a longer life, more convenient; no sliding contacts, spring-powered technology, and handlebar throttle rotation is more flexible                        
• Handlebar integrated injection molding, waterproof, dustproof, longer life, and more secure; one handlebar can be applied to 22mm and 25mm directional models                        
• Split single and double 360-degree throttle design; electric handgrip model universal design, applicable to a wider range of models
• Installation is super simple: after installing the throttle, align the right-hand grip's lead elbow with the throttle cable column and insert it. Then, gently bundle the elbow and cable column together with a tie. This improves upon older accessories which were too complicated to install.
• The first anti-disengagement ring: the use of an anti-disengagement ring prevents the handle from coming off, allowing for more flexible, non-eccentric rotation. This improves upon older models that used an iron ring to fix the handle, where loose screws would cause it to come off easily, and overtightened screws would cause eccentric rotation, making it inflexible.            
• Aluminum ring hoop fastening: the left-hand grip's aluminum ring hoop is fixed more firmly, providing more secure exercise. This improves upon older models that used an iron ring, which would easily sway.
• Wires do not turn with the gas: the electric wire between the right hand and the power supply wire uses spring power supply, and all joint solder is tin-welded to ensure waterproof and anti-corrosion properties.
• Ultra-thin turntable: the left and right-hand turntables are thinner, more beautiful, and more convenient for pressing the horn.

Installation Method:

• Insert the throttle into the throttle seat: insert the throttle into the throttle seat to hook the throttle cable, then close the lid. Then, insert the right hand into the throttle; rotation should be flexible, without grinding.
• Right-hand grips inserted into the oiler at the mountain opening: Coarse positioning: align the anti-rotation elbow of the right grip with the throttle pull line column or other bit basins of the head, insert the right grip so that the elbow rests against the pull line column, and mark the ring into the bit cover. Precise positioning: try inserting the gear slot at the mark several times so that the elbow does not turn and the angle is moderate, not affecting the vehicle's fueling. The right-hand design's idle angle does not exceed 120 degrees; generally, adjusting it to 75-90 degrees can meet the vehicle's refueling needs. The stepping angle of the gear slot is 15 degrees.
• The anti-release ring is installed into the throttle seat. Insert the right handle into the throttle all the way. It must be installed into the throttle seat! The anti-release ring is to prevent the right handle from coming out of the throttle seat, which could cause a safety accident. For some scooter shells, the right handle will be inserted between the right handle and the throttle. In this case, the anti-release ring cannot be installed into the throttle seat; instead, it must be glued with 502 glue at the connection between the throttle and the anti-release ring to prevent the right handle from coming out. Immediately invert the right handle after applying glue to prevent it from flowing into the handle and affecting rotation.
• Tilt installation to extend life: tilting the left switch during installation allows rainwater to drain, extending the switch's life. If the switch has poor contact, gasoline can be dripped in and repeatedly pressed. A blade can be used to remove the button and scrape off contact corrosion, then clean with gasoline.
• DC power supply model connection: DC models feature headlights powered by the battery. The black wire of the handle is positive, connected to the 12-volt positive line from the ignition lock. This line must be able to turn off the power when the ignition lock is turned off. If the power cannot be turned off, and the handlebar switch is forgotten to be turned off, the battery power will be exhausted. The green wire of the handle is negatively connected to the negative pole of the vehicle hitch.

Specifications:

• Product Model: CS-203A1
• Product weight: 248g
• Product material: nylon, soft rubber TPU environmental protection material
• Handle length: left-hand handle: 14cm, right-hand handle length: 14.7cm
• Handle diameter: 2.2cm
• Input voltage: 12V
• Product power: 25W per pair
• Handle temperature: 50 ℃ -70 ℃ adjustable
• Switch type: three-position adjustable switch
• Applicable models: Applicable handlebar diameter of 2.2cm motorcycle handlebar

Package included

• 1Pair x Heated Handlebar
• 1 x Throttle Clips

Specifications